1. <dd id="dgbdx"></dd>
      <dd id="dgbdx"></dd>
      <span id="dgbdx"><input id="dgbdx"><form id="dgbdx"></form></input></span>

    2. <dd id="dgbdx"></dd>
      <dd id="dgbdx"></dd>
        LAIZHOU BESTONE STONE CO.,LTD.
        進入中文版 ENGLISH
        Products Category
        News

        • Cobble stone and Pebble stone • Surface Finishes of Natural St • Flagstone • About Bluestone Natural Stone • Difference Between Artificial

        Contact Us

        Name: Charles Sun
        Mobile: +86-138-84656142
        E-mail: info@bsgranite.com
        Skype: greenred001
        QQ: 35587836
        Taobao: bestonetrade

        Partners
        Taobao StoneContact Linkedin
        News

        Surface Finishes of Natural Stone

        Author: Date:2/12/2011 7:39:21 AM

        Surface Finishes of Natural Stone

        There are many different types of stone available today. When stone is ordered, it is fabricated with a particular type of surface. There are six main type of surfaces that are selected:

        Honed finish: Provides a flat to low sheen gloss. Different levels of gloss can be selected. This surface is very smooth, but often very porous. This texture is common in high traffic buildings. Honed floors should always be protected with Penetrating Sealer because it has wide-open pores. Honed stone colors are not as vibrant as polished stone.

        Polished finish: A glossy surfaces that wears away with time due to heavy foot traffic and using improper maintenance procedure. This surface is very smooth and not porous. The reflectively of polished crystals brings out the brilliant colors and grains of natural stone. The shine comes from the natural reflection of the stone's crystals. The shine is due to polishing bricks and polishing powders used during fabrication. The Shine is not from a coating.

        Flamed finish: A rough surface that is developed through heat. During fabrication, the stone is heated up and the crystals begin to pop, thus forming a rough surface. This surface is very porous and must be treated with an impregnator.

        Sand Blasted finish: This surface is the result of a pressurized flow of sand water that provides a textured surface with a matte gloss.

        Sawn finish: A Process performed by using a gang saw.

        Bush Hammered finish: A pounding action that develops a textured surface. The degree of roughness can be selected.

        Regardless of the type of surface to be maintained, all stone should be protected with sealers.

        1. <dd id="dgbdx"></dd>
          <dd id="dgbdx"></dd>
          <span id="dgbdx"><input id="dgbdx"><form id="dgbdx"></form></input></span>

        2. <dd id="dgbdx"></dd>
          <dd id="dgbdx"></dd>
            日韩无码视频_失禁大喷潮在线播放_两女互相摸呻呤磨豆腐_中文字幕乱老妇女视频